Godex Barcode Printer 在 Vista 打印走了位的問題

This is the process how to Use Ez2000.dll  On Windows Vista:
  ( To download Ez2000.dll  ==>  http://www.pericles.net/download/POS/Ez2000.zip  )

1. Launch MSCONFIG by from the windows "Run" menu
    (Windows key + R, type MSCONFIG , Enter).
2. Click on the Tools tab. Locate "Disable UAC"
3. Click the "Launch" button.
4. After the command is done, close the cmd window and close MSCONFIG.
5. Run port95nt.exe  
    http://www.pericles.net/download/POS/port95nt.exe
    and select reboot when prompted
6. Re-enable UAC by repeating steps 1...4 but this time choose "Enable UAC"
7. Done. Now enjoy your victory.

If the above does not work, then just manually copy the dlportio.sys file to the c:\windows\system32\drivers directory.
This file can be found on Windows XP which already installed port95nt.exe.

1. Power off the printer, press and hold the FEED
2. Power on the printer
3. Release the FEED key after beeping 3 times

                                  LED Ready  / Status            
                           --------------------------------------------
a. Self-Test            (release after beeping 3 times)
b. Auto=Sensing      Orange (flash)  /  Orange           *
c. Direct Thermal      Red (flash)       /    Red             *
d. Thermal Transfer  Orange (flash)   /    Red

部份電腦安裝了 WebPOS Setup 程式後, 在打印 Barcode 時, 少了 Color  及 Font 的設置頁內容 ?!
Sol.:  可以下載下面的 BarCodeWiz ActiveX Component 安裝

1.  Install the Godex 1100 Plus Printer Driver
     http://www.pericles.net/download ... P_WindowsDriver.zip

2.  Set up the Printer Parameters on Control Panel
     Setting_01
     Setting_02
     Setting_03

3.  Modify some Parameters while Barcode Printing ,   e.g. , select  Code_128_Auto

標籤設計軟件

A4 Size Label Reference
  http://www.pericles.net/download/POS/herma_p1_A4_10_100.pdf